Search Vpn Tunnels - ZyXEL Communications Vantage CNM 2.3 User Manual

Chapter 22 VPN Monitor
Table 217 VPN Management > VPN Monitor > By Device > VPN Tunnel Status
LABEL
Community Type
Up Tunnels
Total Tunnels
Show Detail
Total Records

22.2.2 Search VPN Tunnels

Use this screen to search one or some specific VPN tunnels by querying device
name or tunnel name. To open this screen, click a device or a folder, and then click
VPN Management from the menu bar and click VPN Monitor > By Device >
VPN Tunnel Status in the navigation panel. Then click Search Special Tunnel.
Figure 256 VPN Management > VPN Monitor > By Device > VPN Tunnel Status >
Search Special Tunnel
The following table describes the fields in this screen.
Table 218 VPN Management > VPN Monitor > By Device > VPN Tunnel Status >
Search Special Tunnel
LABEL
Device Name
Tunnel Name
Search
490
DESCRIPTION
This displays an VPN community type such as Full Mesh, Hub &
Spoke, or Remote Access.
This displays how many tunnels has been successfully established.
This displays how many tunnels in total are configured in this VPN
community.
Click this to display a screen where you can view detailed VPN
settings among the devices. See
This entry displays the total number of records on the current page
of the list.
DESCRIPTION
Type a partial of or a full case-insensitive device name. A blank of
device name is equivalent to "any".
Type a partial or a full case-sensitive tunnel name. A blank of tunnel
name is equivalent to "any".
Click this to query device(s) or tunnel(s) according to the device
name and tunnel name you input. Clicking this with both fields
empty queries all configured VPN tunnels.
Section 22.1.1 on page 486.
Vantage CNM User's Guide