Chapter 15 AAA
15.2.1 Creating an Active Directory or LDAP Group
Use this screen to create an Active Directory or LDAP group. To access this screen,
click an Add icon in the Device Operation > Device Configuration > Object >
AAA Server > Active Directory (or LDAP) > Group screen.
Figure 177 Device Operation > Device Configuration > Object > AAA Server >
Active Directory (or LDAP) > Group > Add
The following table describes the labels in this screen.
Table 160 Device Operation > Device Configuration > Object > AAA Server > Active
Directory (or LDAP) > Group > Add
LABEL
Configuration
Name
Port
388
DESCRIPTION
All AD or LDAP servers in a group share the same settings in the fields
below.
Enter a descriptive name (up to 63 alphanumerical characters). for
identification purposes.
Specify the port number on the AD or LDAP server(s) to which the
ZyWALL sends authentication requests. Enter a number between 1 and
65535.
This port number should be the same on all AD or LDAP server(s) in this
group.
Vantage CNM User's Guide