ZyXEL Communications Vantage CNM 2.3 User Manual page 268

Centralized network management

Hide thumbs Also See for Vantage CNM 2.3:

Table of Contents

Chapter 9 Device Network Settings

Select WPA-Enterprise or WPA2-Enterprise as the Security Type. The

following figure shows the security fields.

Figure 112 Device Operation > Device Configuration > Network > Interface > WLAN

> General > Add (WPA/WPA2 Security)

The following table describes the WPA/WPA2-related wireless LAN security labels.

Table 104 Device Operation > Device Configuration > Network > Interface > WLAN

> General > Add (WPA/WPA2 Security)

Authentication

Authentication

Select what the ZyWALL uses to authenticate the wireless clients.

Select Auth Method to be able to specify an authentication method

object that you have already configured. The authentication method

can have the ZyWALL check a user's user name and password against

the ZyWALL's local database, a remote LDAP, RADIUS, a Active

Directory server, or more than one of these. See

for how to create authentication method objects.

Select Auth Server to be able to manually specify a RADIUS server's

settings in this screen instead of using an authentication method

This field displays if you set the Authentication Type field to Auth

Select an authentication method object that defines how the ZyWALL

authenticates a wireless user. The ZyWALL's default configuration also

includes an authentication method object named "default" that you

can use. You can configure the "default" authentication method object,

but it's default configuration uses the ZyWALL's local database for

authentication.

Chapter 42 on page

Vantage CNM User's Guide

Troubleshooting