Chapter 9 Device Network Settings
Figure 124 Device Operation > Device Configuration > Network > Interface >
PPPoE/PPTP > Add (USG1000)
Each field is explained in the following table.
Table 112 Device Operation > Device Configuration > Network > Interface > PPP >
Edit > Configuration
LABEL
PPP Interface Properties
Enable
Interface
Name
286
DESCRIPTION
Select this to enable this interface. Clear this to disable this interface.
This field is read-only and displays the name of the PPP interface. The
format is the name of the physical port followed by "ppp". For
example, "wan1_pppoe".
Vantage CNM User's Guide