ZyXEL Communications Vantage CNM 2.3 User Manual page 309

Click Device Operation > Device Configuration > Network > Routing > RIP
to open the following screen.
Figure 137 Device Operation > Device Configuration > Network > Routing > RIP
The following table describes the labels in this screen.
Table 122 Device Operation > Device Configuration > Network > Routing Protocol >
RIP
LABEL
General Setup
Authentication
Text
Authentication
Key
MD5
Authentication
ID
MD5
Authentication
Key
Redistribute
Active
Name
Vantage CNM User's Guide
DESCRIPTION
Select the authentication method used in the RIP network. This
authentication protects the integrity, but not the confidentiality, of
routing updates.
None uses no authentication.
Text uses a plain text password that is sent over the network (not
very secure).
MD5 uses an MD5 password and authentication ID (most secure).
This field is available if the Authentication is Text. Type the
password for text authentication. The key can consist of alphanumeric
characters and the underscore, and it can be up to 8 characters long.
This field is available if the Authentication is MD5. Type the ID for
MD5 authentication. The ID can be between 1 and 255.
This field is available if the Authentication is MD5. Type the
password for MD5 authentication. The password can consist of
alphanumeric characters and the underscore, and it can be up to 16
characters long.
Select this check box to advertise routes that were learned from the
indicated Name.
This field displays other sources of routing information that the
ZyWALL can advertise in the RIP network.
Chapter 9 Device Network Settings
309