ZyXEL Communications Vantage CNM 2.3 User Manual page 35

Table 7 Configuration Screen: Device List (continued)
LABEL
Device
Login
Password
Device HA
Device Role Select Master or Backup for this device's HA role.
Description
Apply
Reset
After clicking Apply and a new device icon displays.
4
2.3.1.2.2 Delete a Device
Follow the steps below to delete a group.
In the device window, click Topology.
1
Right-click on a device and click Delete Device.
2
A warning screen displays.
3
Click OK to delete.
Click Cancel to close this screen without deleting the selected device.
Figure 13 Device Window: Topology: Delete Device Warning
2.3.1.2.3 Associate a Device to Another Folder
To un-associate a device from a folder, log into the web configurator as root or a
user who belongs to the "super" group.
In the device window, click Topology.
1
Vantage CNM User's Guide
DESCRIPTION
This field is only available for a ZLD device. Type the administrator's login
password of the device in this field.
This field is only available for a ZLD device. Select this if you want to
monitor the device's device HA status from the Vantage CNM. After you
select this, the Device Role field appears.
Note: You have to select the correct role matching to the setting on the
device. Otherwise, you cannot see the related information shown
in the Monitor > Device HA status on the Vantage CNM.
Note: You have to add a master device before adding the backup
device in the same HA group.
Enter a description for the ZyXEL device.
Click this to save your changes back to the OTV tree.
Click this to begin configuring this screen afresh.
Chapter 2 GUI Introduction
35