Add Firmware - ZyXEL Communications Vantage CNM 2.3 User Manual

Chapter 18 Firmware Management
Table 199 Device Operation > Firmware Management > Firmware List (continued)
TYPE
FW Version
FW Release Time
Add
Remove
Total Records

18.1.1 Add Firmware

Use this screen to select the firmware you want to upload to Vantage CNM. To
open this screen, click Add in the Device Operation > Firmware Management
> Firmware List screen.
You must upload the whole firmware zip file, which contains the following:
• The device firmware (bin file extension). Only this firmware file is actually
downloaded to the device.
• The device default configuration file (config file extension).
• Device firmware release notes (doc file extension) highlighting.
• Boot module with bm file extension.
• A file with XML file extension. Vantage CNM uses the XML file to gather the
device type, firmware version and release date information.
Besides, you have to make sure the FTP information has been configurated
properly in the CNM System Setting > Configuration > Servers >
Configuration. See
Figure 224 Device Operation > Firmware Management > Firmware List > Add
Type the file name and path of the firmware zip file, or click Browse to locate it.
You may also create an alias that appears in the previous screen. Click Apply to
load the firmware zip file to Vantage CNM. Then, click Device Operation >
Firmware Management > Firmware Upgrade if you want to upload the
firmware to one or more devices. See
450
DESCRIPTION
This field displays ZyXEL device firmware version.
This field displays the date the firmware was created.
Click Add to proceed to the next screen.
Click to delete a selected firmware from your Vantage CNM firmware
management.
This entry displays the total number of records on the current page of
the list.
Section 30.1 on page
Section 18.3 on page
561.
451.
Vantage CNM User's Guide