11.3.1 The VPN Concentrator Add/Edit Screen
The VPN Concentrator Add/Edit screen allows you to create a new VPN
concentrator or edit an existing one. To access this screen, go to the VPN
Concentrator summary screen (see
the Add icon or an Edit icon.
Figure 151 Device Operation > Device Configuration > VPN > IPSec VPN >
Concentrator > Edit
Each field is described in the following table.
Table 135 Device Operation > Device Configuration > VPN > IPSec VPN >
Concentrator > Edit
LABEL
Name
Available
Member
Apply
Cancel
Vantage CNM User's Guide
Section 11.3 on page
DESCRIPTION
Enter the name of the concentrator. You may use 1-31 alphanumeric
characters, underscores(
cannot be a number. This value is case-sensitive.
IPSec VPN connection policies that do not belong to a VPN concentrator
appear on the left. Select any VPN connection policies that you want to
add to the VPN concentrator and click the select arrow to add them.
This field displays the name of each member in the concentrator.
Note: You must disable policy enforcement in each member. See
Section 11.1.1 on page
The VPN concentrator's member VPN connections appear on the right.
Select any VPN connections that you want to remove from the VPN
concentrator, and click the deselect arrow to remove them.
Click Apply to save your changes in the ZyWALL.
Click Cancel to exit this screen without saving.
343), and click either
), or dashes (-), but the first character
_
325.
Chapter 11 IPSec VPN
345