ZyXEL Communications Vantage CNM 2.3 User Manual page 402

Chapter 15 AAA
Table 170 Device Operation > Device Configuration > Object > SSL Application >
Add/Edit: Web Application
LABEL
Server Type
Name
URL
Entry Point
Server
Address(es)
Starting Port
Ending Port
Program Path This field displays if the Server Type is set to RDP.
Web Page
Encryption
402
DESCRIPTION
Specify the type of service for this SSL application.
Select Web Server to allow access to the specified web site hosted on the
local network.
Select OWA (Outlook Web Access) to allow users to access e-mails,
contacts, calenders via Microsoft Outlook-like interface using supported
web browsers. The ZyWALL supports one OWA object.
Select VNC to allow users to manage LAN computers that have Virtual
Network Computing remote desktop server software installed.
Select RDP to allow users to manage LAN computers that have Remote
Desktop Protocol remote desktop server software installed.
Enter a descriptive name to identify this object. You can enter up to 31
characters ("0-9", "a-z", "A-Z", "-" and "_"). Spaces are not allowed.
This field displays if the Server Type is set to Web Server or OWA.
Enter the Fully-Qualified Domain Name (FQDN) or IP address of the
application server.
Note: You must enter the "http://" or "https://" prefix.
Remote users are restricted to access only files in this directory. For
example, if you enter "\remote\" in this field, emote users can only access
files in the "remote" directory.
If a link contains a file that is not within this domain, then remote users
cannot access it.
This field displays if the Server Type is set to Web Server or OWA.
This field is optional. You only need to configure this field if you need to
specify the name of the directory or file on the local server as the home
page or home directory on the user screen.
This field displays if the Server Type is set to RDP or VNC.
Specify the IP address or Fully-Qualified Domain Name (FQDN) of the
computer(s) that you want to allow the remote users to manage.
This field displays if the Server Type is set to RDP or VNC.
Specify the listening ports of the LAN computer(s) running remote desktop
server software. The ZyWALL uses a port number from this range to send
traffic to the LAN computer that is being remotely managed.
You can specify an application to open when a remote user logs into the
remote desktop application.
Select this option to prevent users from saving the web content.
Vantage CNM User's Guide