Address Group Summary Screen - ZyXEL Communications Vantage CNM 2.3 User Manual

The following table describes the labels in this screen.
Table 148 Device Operation > Device Configuration > Object > Address > Address >
Add/Edit
LABEL
Name
Address Type
IP Address
Starting IP
Address
Ending IP
Address
Network
Netmask
Interface
Apply
Cancel

14.4.2 Address Group Summary Screen

The Address Group screen provides a summary of all address groups. To access
this screen, click Device Operation > Device Configuration > Object >
Vantage CNM User's Guide
DESCRIPTION
Type the name used to refer to the address. You may use 1-31
alphanumeric characters, underscores(
character cannot be a number. This value is case-sensitive.
Select the type of address you want to create. Choices are: HOST,
RANGE, SUBNET, INTERFACE IP, INTERFACE SUBNET, and
INTERFACE GATEWAY.
Note: The ZyWALL automatically updates address objects that are
based on an interface's IP address, subnet, or gateway if the
interface's IP address settings change. For example, if you
change ge1's IP address, the ZyWALL automatically updates
the corresponding interface-based, LAN subnet address
object.
This field is only available if the Address Type is HOST. This field
cannot be blank. Enter the IP address that this address object
represents.
This field is only available if the Address Type is RANGE. This field
cannot be blank. Enter the beginning of the range of IP addresses that
this address object represents.
This field is only available if the Address Type is RANGE. This field
cannot be blank. Enter the end of the range of IP address that this
address object represents.
This field is only available if the Address Type is SUBNET, in which case
this field cannot be blank. Enter the IP address of the network that this
address object represents.
This field is only available if the Address Type is SUBNET, in which case
this field cannot be blank. Enter the subnet mask of the network that
this address object represents. Use dotted decimal format.
If you selected INTERFACE IP, INTERFACE SUBNET, or INTERFACE
GATEWAY as the Address Type, use this field to select the interface of
the network that this address object represents.
Click Apply to save your changes back to the ZyWALL.
Click Cancel to exit this screen without saving your changes.
Chapter 14 Object
), or dashes (-), but the first
_
371