ZyXEL Communications Vantage CNM 2.3 User Manual page 448

Centralized network management

Hide thumbs Also See for Vantage CNM 2.3:

Table of Contents

Chapter 17 Configuration Management

Table 198 Device Operation > Configuration Management > ZLD Firewall Rule

Group Configuration > Add/Edit (continued)

Source Address

This is the number of an individual entry.

This field displays the name of ZLD-based ZyWALL(s) to which this

rule applies.

Use this field to select a source address setting to which the rule

applies for the selected device.

Select Keep Source Address in firewall rule to use the source

address setting configured in the Firewall Rule section above.

Select Replace Source Address in firewall rule to display

additional fields that you can customize for this device. See

14.4.1 on page 370

for similar field description.

Use this field to select a destination address setting to which the rule

applies for the selected device.

Select Keep Destination Address in firewall rule to use the

destination address setting configured in the Firewall Rule section

Select Replace Destination Address in firewall rule to display

additional fields that you can customize for this device. See

14.4.1 on page 370

for similar field description.

This column provides icons to add, edit, and remove a device to

which this firewall rule applies.

To add a device, click the Add icon at the top of the column.

To delete an existing device, click the Remove icon next to the

device. The Web Configurator confirms that you want to delete the

group before doing so.

Click this to save your changes back to the device.

Click this to exit this screen without saving.

Vantage CNM User's Guide

Troubleshooting