ZyXEL Communications Vantage CNM 2.3 User Manual page 238

Centralized network management

Hide thumbs Also See for Vantage CNM 2.3:

Table of Contents

Chapter 7 Device Advanced Settings

The following table describes the labels in this screen.

Table 94 Device Operation > Device Configuration > Advanced > Remote

Authenticate

Certificates

Server Access

Secure Client

Select the Server Certificate that the device will use to identify itself.

The device is the SSL server and must always authenticate itself to the

SSL client (the computer which requests the HTTPS connection with the

Select Authenticate Client Certificates (optional) to require the SSL

client to authenticate itself to the device by sending the device a

certificate. To do that the SSL client must have a CA-signed certificate

from a CA that has been imported as a trusted CA on the device.

The HTTPS proxy server listens on port 443 by default. If you change the

HTTPS proxy server port to a different number on the device, for

example 8443, then you must notify people who need to access the

device web configurator to use "https://device IP Address:8443" as the

Select the interface(s) through which a computer may access the device

using this service.

You can allow only secure web configurator access by setting the HTTP

Server Access field to Disable and setting the HTTPS Server Access

field to an interface(s).

A secure client is a "trusted" computer that is allowed to communicate

with the device using this service.

Select All to allow any computer to access the device using this service.

Choose Selected to just allow the computer with the IP address that you

specify to access the device using this service.

Vantage CNM User's Guide

Troubleshooting