ZyXEL Communications Vantage CNM 2.3 User Manual page 261

Centralized network management

Hide thumbs Also See for Vantage CNM 2.3:

Table of Contents

The following table describes the general wireless LAN labels.

Table 101 Network > Interface > WLAN > Add (No Security)

General Settings

Virtual Access Point Settings

Block Intra-

Associations

WLAN Security Settings

Vantage CNM User's Guide

Select this option to turn on the wireless LAN interface.

Specify a number from 1~8 to complete the name for this wireless

LAN interface.

Enter a description of this interface. It is not used elsewhere. You can

use alphanumeric and

()+/:=?!*#@$_%-

up to 60 characters long.

(Service Set IDentity) The SSID identifies the Service Set with which a

wireless station is associated. Wireless stations associating to the

access point (AP) must have the same SSID. Enter a descriptive name

(up to 32 printable 7-bit ASCII characters) for the wireless LAN. To

make your wireless network more secure, change the default SSID to

something that is difficult to guess.

Select to hide the SSID in the outgoing beacon frame so a station

cannot obtain the SSID through scanning.

Select this to prevent wireless clients in this profile's BSS from

communicating with one another.

Specify the highest number of wireless clients that are allowed to

connect to the wireless interface at the same time.

Chapter 9 Device Network Settings

characters, and it can be

Troubleshooting