ZyXEL Communications Vantage CNM 2.3 User Manual page 289

Centralized network management

Hide thumbs Also See for Vantage CNM 2.3:

Table of Contents

Table 112 Device Operation > Device Configuration > Network > Interface > PPP >

Edit > Configuration (continued)

Check Period

Check Timeout Enter the number of seconds to wait for a response before the

Ping Default

Vantage CNM User's Guide

Enter the number of seconds between connection check attempts.

attempt is a failure.

Enter the number of consecutive failures before the ZyWALL stops

routing through the gateway.

Select this to use the default gateway for the connectivity check.

Select this to specify a domain name or IP address for the

connectivity check. Enter that domain name or IP address in the field

Click Apply to save your changes back to the ZyWALL.

Click Cancel to exit this screen without saving.

Chapter 9 Device Network Settings

Troubleshooting