Create An Address Configuration Bb (Zld) - ZyXEL Communications Vantage CNM 2.3 User Manual

Table 192 Device Operation > Configuration Management > Building Block >
Configuration BB > Add/Edit (ZLD User) > Create (continued)
TYPE
Lease Time
Reauthentication
Time
Save&Exit
Cancel

17.8.3 Create an Address Configuration BB (ZLD)

If you select a ZLD ZyWALL model and ZLD Address in the Device Operation >
Configuration Management > Building Block > Configuration BB > Add or
Edit screen, the following screen appears. Use this menu item to create an
address configuration building block.
Figure 217 Device Operation > Configuration Management > Building Block >
Configuration BB > Add/Edit (ZLD Address) > Create
Vantage CNM User's Guide
DESCRIPTION
Enter the number of minutes this user has to renew the current
session before the user is logged out. You can specify 1 to 1440
minutes. You can enter 0 to make the number of minutes unlimited.
Admin users renew the session every time the main screen refreshes
in the Web Configurator. Access users can renew the session by
clicking the Renew button on their screen. If you allow access users
to renew time automatically (see
users can select this check box on their screen as well. In this case,
the session is automatically renewed before the lease time expires.
Type the number of minutes this user can be logged into the ZyWALL
in one session before the user has to log in again. You can specify 1
to 1440 minutes. You can enter 0 to make the number of minutes
unlimited. Unlike Lease Time, the user has no opportunity to renew
the session without logging out.
Click this to save your changes and back to the previous screen.
Click this to exit this screen without saving your changes.
Chapter 17 Configuration Management
Section 14.3 on page 362), the
439