Chapter 5 Device Network Settings
open this screen, click Device Operation > Device Configuration > Network
> LAN > IP Alias.
Figure 29 Device Operation > Device Configuration > Network > LAN > IP Alias
The following table describes the fields in this screen.
Table 16 Device Operation > Device Configuration > Network > LAN > IP Alias
LABEL
IP Alias 1,2
IP Address
IP Subnet Mask
RIP Direction
64
DESCRIPTION
Select the check box to configure another network for the device.
Enter the IP address of the device in dotted decimal notation.
The device automatically calculates the subnet mask based how many
aliases you select. See also the appendices for more information on IP
subnetting.
RIP (Routing Information Protocol, RFC1058 and RFC 1389) allows a
router to exchange routing information with other routers. The RIP
Direction field controls the sending and receiving of RIP packets.
Select the RIP direction from Both/In Only/Out Only/None. When
set to Both or Out Only, the device broadcasts its routing table
periodically. When set to Both or In Only, it incorporates the RIP
information that it receives; when set to None, it does not send any
RIP packets and ignores any RIP packets received.
Vantage CNM User's Guide