ZyXEL Communications Vantage CNM 2.3 User Manual page 103

menu bar and then click Device Configuration > Network > WAN > Setup in
the navigation panel.
Figure 43 Device Operation > Device Configuration > Network > WAN > Setup
(Prestige)
The following table describes the fields in this screen.
Table 29 Device Operation > Device Configuration > Network > WAN > Setup
(Prestige)
LABEL
Name
Mode
Encapsulation
Vantage CNM User's Guide
DESCRIPTION
Enter the name of your Internet Service Provider, for example,
MyISP. This information is for identification purposes only.
Select Routing from the drop-down list box if your ISP allows
multiple computers to share an Internet account. Otherwise
select Bridge.
Select the method of encapsulation used by your ISP from the
drop-down list box. Choices vary depending on the mode you
select in the Mode field.
If you select Bridge in the Mode field, select either PPPoA or
RFC 1483.
If you select Routing in the Mode field, select PPPoA, RFC
1483, ENET ENCAP or PPPoE.
Chapter 5 Device Network Settings
103