ZyXEL Communications Vantage CNM 2.3 User Manual page 515

The following table describes the labels in this screen.
Table 228 Monitor > 3G Monitor > Radio Report (Folder list)
LABEL
Current Time
Page Size
Device Name
Signal Quality
Signal Strength
Statistics
Runtime Monitor
Total Records
Vantage CNM User's Guide
DESCRIPTION
This shows the date and time of viewing. The date is in
Year:Month:Day format. The time is in XXhr(s) YYmin(s) ZZsec(s)
format.
Select how many records you want to see in each page.
This is the name of the device where the 3G card is installed.
This is the signal quality of the 3G card if it is up. This is
represented by a bar graph in ascending height order. Depending
on how many bars are lit green, the 3G connection can be:
• No signal - All bars are grayed out.
• Very weak - The smallest bar in the left is lit green.
• Weak - The two bars in the left are lit green.
• Medium - Three bars from the left are lit green.
• Strong - Four bars from the left are lit green.
• Very strong - All bars are lit green.
This is N/A if the device is offline.
This is the signal strength of the 3G connection. The unit of
measurement used is dBm (Decibels per milliwatt).
This is N/A if the device is offline.
Click the "Show Statistics" icon to view a bar graph showing the
3G signal quality statistics.
Refer to Section Figure 277 on page 516
Click the "Runtime Monitor" icon to view a line graph showing the
3G signal strength report.
Refer to Section Figure 278 on page 517
This shows how many records there are in all.
Chapter 24 3G Monitor
to view the diagram.
to view the diagram.
515