ZyXEL Communications Vantage CNM 2.3 User Manual page 454

Chapter 18 Firmware Management
in the Device Operation > Firmware Management > Firmware Upgrade
screen (Refer to
Figure 228 Device Operation > Firmware Management > Firmware Upgrade
(Device) > Upgrade
The following table describes the fields in this screen.
Table 202 Device Operation > Firmware Management > Firmware Upgrade (Device)
> Upgrade
TYPE
Device
Information
#
Device Name
Device Type
Current FW
Version
Upgrade Status
Total Records
Upgrade Time
454
Figure 227 on page 453
DESCRIPTION
This section displays the selected device(s) to which you will perform
the firmware upgrade(s).
This is the number of an individual entry.
This field displays the selected device name(s).
This field displays the model. You must upload firmware to the correct
model. Vantage CNM should automatically detect firmware for the
device selected. Uploading incorrect firmware may damage the
device.
This field displays the firmware version the ZyXEL device is using. It is
blank if the device has not been registered.
This field displays the device's current status. Ready means the
device is ok to perform the firmware upgrade. Offline means the
device is not currently connected to the Vantage CNM. Not Yet
Required means the device has not connected to the Vantage CNM
since it was added in the Vantage CNM. Rom File Operating means
the device is busy for a configuration backup or restore. Scheduled
means the device has been scheduled for a firmware upgrade.
Upgrading means the device is processing a firmware upgrade.
You can perform the device firmware upgrade only when the status is
Ready.
This entry displays the total number of records on the current page of
the list.
).
Vantage CNM User's Guide