Adding A Name Server Record; Figure 123 Configuration > Dns > System > Add Address Record; Table 96 Configuration > Dns > System > Add Address Record - ZyXEL Communications Vantage CNM User Manual

Vantage CNM User's Guide
Figure 123 Configuration > DNS > System > Add Address Record
The following table describes the labels in this screen.
Table 96 Configuration > DNS > System > Add Address Record
LABEL
FQDN
IP Address
Enable Wildcard
Apply
Reset
Cancel

17.6.3 Adding a Name Server Record

Click Add in the System screen Name Server Record section to insert a name server record.
247
DESCRIPTION
Type a fully qualified domain name (FQDN) of a server. An FQDN starts with a
host name and continues all the way up to the top-level domain name. For
example, www.zyxel.com.tw is a fully qualified domain name, where "www" is the
host, "zyxel" is the second-level domain, and "com.tw" is the top level domain.
If this entry is for one of the WAN ports, select WAN Interface 1 or WAN Interface
2.
For entries that are not for one of the WAN ports, select Custom and enter the IP
address of the host in dotted decimal notation.
Select the check box to enable DNS wildcard.
Click Apply to save your changes back to the ZyWALL.
Click Reset to begin configuring this screen afresh.
Click Cancel to exit this screen without saving.
Chapter 17 Configuration > DNS