ZyXEL Communications Vantage CNM 2.3 User Manual page 108

Chapter 5 Device Network Settings
Table 30 Device Operation > Device Configuration > Network > WAN > Backup
(Prestige) (continued)
LABEL
Backup Gateway IP
Dial Backup
Dial Active
Priority
Port Speed
User Name
Password
Pri Phone
Advanced Backup
Apply
Reset
108
DESCRIPTION
Type the IP address of your backup gateway in dotted decimal
notation. The device automatically forwards traffic to this IP
address if the device's Internet connection terminates.
Select this check box to turn on dial backup.
If you activate dial backup, you must configure at least one Check
WAN IP Address.
This field sets this route's priority among the three routes the
device uses (normal, traffic redirect and dial backup). Type a
number (1 to 15) to set the priority of the dial backup route for
data transmission. The smaller the number, the higher the priority.
If the three routes have the same metrics, the priority of the
routes is as follows: WAN, Traffic Redirect, Dial Backup.
Use the drop-down list box to select the speed of the connection
between the dial backup port and the external device. Available
speeds are: 9600, 19200, 38400, 57600, 115200 or 230400
bps.
Type the login name assigned by your ISP.
Type the password assigned by your ISP.
Type the first (primary) phone number from the ISP for this
remote node. Some areas require dialing the pound sign # before
the phone number for local calls. Include a # symbol at the
beginning of the phone numbers as required.
Click this button to display the WAN:Prestige Advanced Backup
screen and edit more details of your WAN backup setup.
Click this to save the changes.
Click this to begin configuring this screen afresh.
Vantage CNM User's Guide