Adding A Submap Or Device; Figure 21 Map: Add Submap/Device; Table 13 Map: Add Submap/Device - ZyXEL Communications Version 1.03 User Manual

Chapter 4 Map

4.1.1 Adding a Submap or Device

To add a new submap or a new device, select the Root Subnet or a submap icon in the Device
List Panel.
Click Map > Add Submap/Device to display the following screen.

Figure 21 Map: Add Submap/Device

The following table describes the labels in this screen.

Table 13 Map: Add Submap/Device

LABEL
Properties
Name
IP Address
Login Name
Password
Description
Get Community
Set Community
Trap Community
54
DESCRIPTION
These options are not applicable when you edit the properties of an existing
submap or device.
Select the Submap or Device radio button to add a new submap or device icon to
the Device List Panel.
If you select Submap, only the Name and Description fields display are
applicable; all other fields appear as read-only.
Enter a descriptive name (up to 30 characters) for identification purposes.
This field is not applicable when you select Submap.
Enter the IP address of the device.
Enter the administrator account user name to log into the switch.
Enter the administrative password (up to 30 characters) you use to log in to the
switch. This password is used by the EMS administrator for device firmware
upload.
Enter a description (up to 30 characters) about the device.
Enter the get community, which is the password for the incoming Get- and GetNext-
requests from the management station.
Enter the set community, which is the password for incoming Set- requests from the
management station.
Enter the trap community, which is the password sent with each trap to the SNMP
manager.
NetAtlas Workgroup User's Guide