ZyXEL Communications Vantage CNM 2.3 User Manual page 114

Chapter 5 Device Network Settings
Table 32 Device Operation > Device Configuration > Network > Wireless Card >
Wireless Card (continued)
LABEL
Security
Apply
Reset
114
DESCRIPTION
Select one of the security settings.
No Security
Static WEP
WPA-PSK
WPA
802.1x + Dynamic WEP
802.1x + Static WEP
802.1x + No WEP
No Access 802.1x + Static WEP
No Access 802.1x + No WEP
Select No Security to allow wireless stations to communicate with the
access points without any data encryption. Otherwise, select the security
you need and see the following sections for more information.
Note: The installed ZyXEL wireless card may not support all of the
wireless security features you can configure in the Vantage
CNM.
Please see the product specifications appendix for a table of
compatible ZyXEL wireless cards and the wireless security
features each card supports.
Click this to save your changes back to the device.
Click this to begin configuring this screen afresh.
Vantage CNM User's Guide