ZyXEL Communications Vantage CNM 2.3 User Manual page 301

• Limiting the amount of bandwidth available and setting a priority for traffic.
IPPR follows the existing packet filtering facility of RAS in style and in
implementation.
Click a column's heading cell to sort the table entries by that column's criteria.
Click the heading cell again to reverse the sort order.
Figure 133 Device Operation > Device Configuration > Network > Routing > Policy
Route
The following table describes the labels in this screen.
Table 118 Device Operation > Device Configuration > Network > Routing > Policy
Route
LABEL
Enable BWM
Page Size
#
User
Vantage CNM User's Guide
DESCRIPTION
This is a global setting for enabling or disabling bandwidth management
on the ZyWALL. You must enable this setting to have individual policy
routes or application patrol policies apply bandwidth management.
This same setting also appears in the AppPatrol > General screen.
Enabling or disabling it in one screen also enables or disables it in the
other screen.
Select how many entries you want to display on each page.
This is the number of an individual policy route.
This is the name of the user (group) object from which the packets are
sent. any means all users.
Chapter 9 Device Network Settings
301