ZyXEL Communications Vantage CNM 2.3 User Manual page 79

Table 21 Device Operation > Device Configuration > Network > WAN > WAN1/2
(ZyNOS ZyWALL with two WAN ports) (continued)
LABEL
Service Type
User Name
Password
Retype to
confirm
Password
Login Server IP
Address
Telia Login
Server (Telia
Login only)
Relogin
Every(mins)
(Telia Login
only)
WAN IP Address Assignment
Get
automatically
from ISP
Use fixed IP
address
My WAN IP
Address
My WAN IP
Subnet Mask
Gateway IP
Address
Advanced Setup
RIP Direction
Vantage CNM User's Guide
DESCRIPTION
Choose from Standard, RR-Telstra (RoadRunner Telstra authentication
method), RR-Manager (Roadrunner Manager authentication method),
RR-Toshiba (Roadrunner Toshiba authentication method) or Telia
Login.
The following fields do not appear with the Standard service type.
Type the user name given to you by your ISP.
Type the password associated with the user name above.
Type your password again to make sure that you have entered is
correctly.
Type the authentication server IP address here if your ISP gave you one.
This field is not available for Telia Login.
Type the domain name of the Telia login server, for example
login1.telia.com.
The Telia server logs the Vantage CNM out if the Vantage CNM does not
log in periodically. Type the number of minutes from 1 to 59 (30 default)
for the Vantage CNM to wait between logins.
Select this option If your ISP did not assign you a fixed IP address. This
is the default selection.
Select this option If the ISP assigned a fixed IP address.
Enter your WAN IP address in this field if you selected Use Fixed IP
Address.
Enter the IP subnet mask (if your ISP gave you one) in this field if you
selected Use Fixed IP Address.
Enter the gateway IP address (if your ISP gave you one) in this field if
you selected Use Fixed IP Address.
RIP (Routing Information Protocol) allows a router to exchange routing
information with other routers. The RIP Direction field controls the
sending and receiving of RIP packets.
Choose Both, None, In Only or Out Only.
When set to Both or Out Only, the Vantage CNM will broadcast its
routing table periodically.
When set to Both or In Only, the Vantage CNM will incorporate RIP
information that it receives.
When set to None, the Vantage CNM will not send any RIP packets and
will ignore any RIP packets received.
By default, RIP Direction is set to Both.
Chapter 5 Device Network Settings
79