Chapter 17 Configuration Management
Edit screen, the following screen appears. Use this menu item to create a user
configuration building block.
Figure 216 Device Operation > Configuration Management > Building Block >
Configuration BB > Add/Edit (ZLD User) > Create
The following table describes the fields in this screen.
Table 192 Device Operation > Configuration Management > Building Block >
Configuration BB > Add/Edit (ZLD User) > Create
TYPE
User Type
Password
Retype
Description
Authentication
Timeout Settings
438
DESCRIPTION
Select what type of user this is. Choices are:
•
Admin - this user can look at and change the configuration of the
ZyWALL
•
Limited-Admin - this user can look at the configuration of the
ZyWALL but not to change it
•
User - this user has access to the ZyWALL's services but cannot
look at the configuration
•
Guest - this user has access to the ZyWALL's services but cannot
look at the configuration
•
Ext-User - this user account is maintained in a remote server,
such as RADIUS or LDAP.
This field is not available if you select the Ext-User user type.
Enter the password of this user account. It can consist of 4 - 30
alphanumeric characters.
This field is not available if you select the Ext-User user type. Enter
the password again.
Enter the description of each user, if any. You can use up to 60
printable ASCII characters. Default descriptions are provided.
If you want to set authentication timeout to a value other than the
default settings, select Use Manual Settings then fill your
preferred values in the fields that follow.
Vantage CNM User's Guide