ZyXEL Communications Vantage CNM 2.3 User Manual page 244

Chapter 8 Device Log
Table 95 Device Operation > Device Configuration > Device Log (continued)
LABEL
SMTP Authentication
User Name
Password
Log
Send Immediate
Alert
Log Consolidation
Log Consolidation
Active
Log Consolidation
Period
Reports Setup
Send Raw Traffic
Statistics to Syslog
Server
Apply
Reset
244
DESCRIPTION
SMTP (Simple Mail Transfer Protocol) is the message-exchange
standard for the Internet. SMTP enables you to move messages
from one e-mail server to another.
Select the check box to activate SMTP authentication. If mail
server authentication is needed but this feature is disabled, you
will not receive the e-mail logs.
Enter the user name (up to 31 characters) (usually the user name
of a mail account).
Enter the password associated with the user name above.
Select the categories of logs that you want to record. Logs include
alerts.
Select the categories of alerts for which you want the device to
instantly e-mail alerts to the e-mail address specified in the Send
Alerts To field.
Some logs (such as the Attacks logs) may be so numerous that it
becomes easy to ignore other important log messages. Select this
check box to merge logs with identical messages into one log.
Specify the time interval during which the device merges logs with
identical messages into one log.
Select the check box if you want the device to send traffic logs to
Vantage Report or the specified syslog server. The device
generates a traffic log when a "session" is terminated. A traffic log
summarizes the session's type, when it started and stopped the
amount of traffic that was sent and received and so on. An
external log analyzer can reconstruct and analyze the traffic
flowing through the device after collecting the traffic logs.
Select this to view device's traffic report.
Click this to save your customized settings and exit this screen.
Click this to begin configuring this screen afresh.
Vantage CNM User's Guide