ZyXEL Communications Vantage CNM 2.3 User Manual page 478

Chapter 20 VPN Community
Click the Load a BB icon to use phase 1 or phase 2 setting from an existing
building block. The following pop-up screen appears.
Figure 246 VPN Management > VPN Community > Add/Edit > Load a BB
Select a building block from the list box, and click Apply. Or click Cancel to close
the screen without applying any setting.
Click the Save as a BB icon to save the current phase 1 or phase 2 setting as a
building block. The following pop-up screen appears.
Figure 247 VPN Management > VPN Community > Add/Edit > Save as a BB
Enter the name of the new building block, and click Apply. The name must be 1-
32 alphanumeric characters or underscores (_). It cannot include spaces. The
name is case-sensitive.
478
Vantage CNM User's Guide