Create A Service Configuration Bb (Zld) - ZyXEL Communications Vantage CNM 2.3 User Manual

Chapter 17 Configuration Management
The following table describes the fields in this screen.
Table 193 Device Operation > Configuration Management > Building Block >
Configuration BB > Add/Edit (ZLD Address) > Create
TYPE
Address Type
IP Address
Starting IP Address This field is only available if the Address Type is RANGE. This field
Ending IP Address
Network
Netmask
Save&Exit
Cancel

17.8.4 Create a Service Configuration BB (ZLD)

If you select a ZLD ZyWALL model and ZLD Service in the Device Operation >
Configuration Management > Building Block > Configuration BB > Add or
440
DESCRIPTION
Select the type of address you want to create. Choices are: HOST,
RANGE, SUBNET.
Note: The ZyWALL automatically updates address objects that
are based on an interface's IP address, subnet, or
gateway if the interface's IP address settings change. For
example, if you change ge1's IP address, the ZyWALL
automatically updates the corresponding interface-based,
LAN subnet address object.
This field is only available if the Address Type is HOST. This field
cannot be blank. Enter the IP address that this address object
represents.
cannot be blank. Enter the beginning of the range of IP addresses
that this address object represents.
This field is only available if the Address Type is RANGE. This field
cannot be blank. Enter the end of the range of IP address that this
address object represents.
This field is only available if the Address Type is SUBNET, in which
case this field cannot be blank. Enter the IP address of the network
that this address object represents.
This field is only available if the Address Type is SUBNET, in which
case this field cannot be blank. Enter the subnet mask of the
network that this address object represents. Use dotted decimal
format.
Click this to save your changes and back to the previous screen.
Click this to exit this screen without saving your changes.
Vantage CNM User's Guide