ZyXEL Communications Vantage CNM 2.3 User Manual page 122

Centralized network management

Hide thumbs Also See for Vantage CNM 2.3:

Table of Contents

Chapter 5 Device Network Settings

Note: Be careful not to list your computer's MAC address and set the Action field to

Deny Association when managing the device via a wireless connection. This

would lock you out.

Figure 48 Device Operation > Device Configuration > Network > Wireless Card >

The following table describes the fields in this screen.

Table 41 Device Operation > Device Configuration > Network > Wireless Card >

User Name Enter a descriptive name for the MAC address.

Select this to enable MAC address filtering.

Define the filter action for the list of MAC addresses in the MAC Address

Select Deny Association to block access to the router, MAC addresses not

listed will be allowed to access the device. Select Allow Association to

permit access to the router, MAC addresses not listed will be denied access

to the device.

This is the index number of the MAC address.

Enter the MAC addresses in a valid MAC address format, that is, six

hexadecimal character pairs, for example, 12:34:56:78:9a:bc of the

wireless stations that are allowed or denied access to the device in these

address fields.

Click this to save your changes back to the device.

Click this to begin configuring this screen afresh.

Vantage CNM User's Guide

Troubleshooting