ZyXEL Communications Vantage CNM 2.3 User Manual page 646

Appendix D IP Addresses and Subnetting
Notation
Since the mask is always a continuous number of ones beginning from the left,
followed by a continuous number of zeros for the remainder of the 32 bit mask,
you can simply specify the number of ones instead of writing the value of each
octet. This is usually specified by writing a "/" followed by the number of bits in
the mask after the address.
For example, 192.1.1.0 /25 is equivalent to saying 192.1.1.0 with subnet mask
255.255.255.128.
The following table shows some possible subnet masks using both notations.
Table 285 Alternative Subnet Mask Notation
SUBNET MASK
255.255.255.0
255.255.255.128
255.255.255.192
255.255.255.224
255.255.255.240
255.255.255.248
255.255.255.252
Subnetting
You can use subnetting to divide one network into multiple sub-networks. In the
following example a network administrator creates two sub-networks to isolate a
group of servers from the rest of the company network for security reasons.
In this example, the company network address is 192.168.1.0. The first three
octets of the address (192.168.1) are the network number, and the remaining
octet is the host ID, allowing a maximum of 2
646
ALTERNATIVE LAST OCTET
NOTATION (BINARY)
/24 0000 0000
/25 1000 0000
/26 1100 0000
/27 1110 0000
/28 1111 0000
/29 1111 1000
/30 1111 1100
LAST OCTET
(DECIMAL)
0
128
192
224
240
248
252
8
– 2 or 254 possible hosts.
Vantage CNM User's Guide