Service; Add/Edit Service - ZyXEL Communications Vantage CNM 2.3 User Manual

6.1.6 Service

Click Device Operation in the menu bar and then click Device Configuration >
Security > Firewall > Service in the navigation panel to open the screen as
shown next. Use this screen to configure custom services for use in firewall rules
or view the services that are predefined in the device.
Figure 54 Device Operation > Device Configuration > Security > Firewall > Service
The following table describes the labels in this screen.
Table 47 Device Operation > Device Configuration > Security > Firewall > Service
LABEL
Custom Service
#
Service Name
Protocol
Attribute
Add
Delete

6.1.7 Add/Edit Service

Click Add or Edit on an existing service record in the Device Operation >
Device Configuration > Security > Firewall > Service screen to open the
Vantage CNM User's Guide
DESCRIPTION
This table shows all configured custom services.
This is the index number of the custom service. Click the number to go
to the screen where you can edit the service.
This is the name of the service.
This is the IP protocol type.
If you selected Custom, this is the IP protocol value you entered.
This field displays the IP port number(s) or ICMP type and code that
defines the service.
Click this button to bring up the screen that you use to configure a new
custom service that is not in the predefined list of services.
Click the delete icon to remove an existing service.
Chapter 6 Device Security Settings
135