Custom Table Add/Edit - ZyXEL Communications ENTERPRISE NETWORK CENTER Manual

Chapter 4 Configuration

4.1.3 Custom Table Add/Edit

To open the Custom Table screen add or edit screen, select a device in the OTV and click
Configuration > MIB Browser > Custom Table > Add (or select a custom table and click Edit).
Use this screen to name the custom table and select its member objects.
Figure 65 Configuration > MIB Browser > Custom Table > Add
The following table describes the labels in this screen.
Table 25 Configuration > MIB Browser > Custom Table > Add
LABEL
Table Name
Available Items
Selected Items
Cancel
OK
98
DESCRIPTION
Enter up to 20 characters to identify the custom table. You can only edit this
when adding a custom table, it is read-only when editing a custom table.
Select the objects (leaf nodes) under the same parent in the MIB tree to
include in this table and use the >> arrow to move them to the Selected
Items list.
This section lists the objects included in this custom table. Select an object
and click the << arrow if you need to remove it from the custom table.
Click Cancel to discard all changes and close this screen.
Click OK to save the changes and close this screen.
ENC User's Guide