Table 127 Device Operation > Device Cofniguration > Firewall > Session Limit
LABEL
Add icon
Apply
Reset
10.2.1 The Session Limit Add/Edit Screen
Click Device Operation > Device Cofniguration > Firewall > Session Limit
and the Add or Edit icon to display the Firewall Session Limit Edit screen. Use
this screen to configure rules that define a session limit for specific users or
addresses.
Figure 143
Edit
Vantage CNM User's Guide
DESCRIPTION
Click the Add icon in the heading row to add a new first entry.
Click the Edit icon to go to the screen where you can edit the rule on
the ZyWALL.
Click the Add icon in an entry to add a rule below the current entry.
Click the Remove icon to delete an existing rule from the ZyWALL. A
window displays asking you to confirm that you want to delete the rule.
Note that subsequent rules move up by one when you take this action.
In a numbered list, click the Move to N icon to display a field to type an
index number for where you want to put that rule and press [ENTER] to
move the rule to the number that you typed. For example, if you type 6,
the rule you are moving becomes number 6 and the previous rule 6 (if
there is one) gets pushed up (or down) one.
The ordering of your rules is important as they are applied in order of
their numbering.
Click Apply to save your changes back to the ZyWALL.
Click Reset to begin configuring this screen afresh.
Device Operation > Device Cofniguration > Firewall > Session Limit >
Chapter 10 Firewall
321