Vlan Summary Screen; Vlan Add/Edit - ZyXEL Communications Vantage CNM 2.3 User Manual

Chapter 9 Device Network Settings

9.3 VLAN Summary Screen

This screen lists every VLAN interface and virtual interface created on top of VLAN
interfaces. To access this screen, click Device Operation > Device
Configuration > Network > Interface > VLAN.
Figure 115 Device Operation > Device Configuration > Network > Interface > VLAN
Each field is explained in the following table.
Table 107 Device Operation > Device Configuration > Network > Interface > VLAN
LABEL
#
Name
Port/VID
IP Address
Mask
Add icon

9.3.1 VLAN Add/Edit

This screen lets you configure IP address assignment, interface bandwidth
parameters, DHCP settings, and connectivity check for each VLAN interface. To
access this screen, click the Add icon at the top of the Add column or click an
272
DESCRIPTION
This field is a sequential value, and it is not associated with any interface.
This field displays the name of the interface.
For VLAN interfaces, this field displays
• the Ethernet interface on which the VLAN interface is created
• the VLAN ID
For virtual interfaces, this field is blank.
This field displays the current IP address of the interface. If the IP address is
0.0.0.0, the interface does not have an IP address yet.
This screen also shows whether the IP address is a static IP address
(STATIC) or dynamically assigned (DHCP). IP addresses are always static
in virtual interfaces.
This field displays the interface's subnet mask in dot decimal notation.
This column lets you create, edit, remove, activate, and deactivate
interfaces.
To create a VLAN interface, click the Add icon at the top of the column.
To create a virtual VLAN interface, click the Add icon next to the
corresponding VLAN interface.
To edit an interface, click the Edit icon next to it.
To remove an interface, click the Remove icon next to it. The Vantage CNM
confirms you want to remove it before doing so.
Vantage CNM User's Guide