The Ssl Global Setting Screen - ZyXEL Communications Vantage CNM 2.3 User Manual

Table 137 Device Operation > Device Configuration > VPN > SSL VPN > Access
Privilege > Add/Edit (continued)
LABEL
Apply
Cancel

12.3 The SSL Global Setting Screen

Click Device Operation > Device Configuration > VPN > SSL VPN and click
the Global Setting tab to display the following screen. Use this screen to set the
IP address of the ZyWALL (or a gateway device) on your network for full tunnel
mode access, enter access messages or upload a custom logo to be displayed on
the remote user screen.
Figure 154 Device Operation > Device Configuration > VPN > SSL VPN > Global
Setting
The following table describes the labels in this screen.
Table 138 Device Operation > Device Configuration > VPN > SSL VPN > Global
Setting
LABEL
Global Setting
Network
Extension Local
IP
Message
Login Message
Vantage CNM User's Guide
DESCRIPTION
Click Apply to save the changes and return to the main Access
Privilege screen.
Click Cancel to discard all changes and return to the main Access
Privilege screen.
DESCRIPTION
Specify the IP address of the ZyWALL (or a gateway device) for full
tunnel mode SSL VPN access.
Leave this field to the default settings unless it conflicts with another
interface.
Specify a message to display on the screen when a user logs in and an
SSL VPN connection is established successfully. You can enter up to 60
characters ("a-z", A-Z", "0-9") with spaces allowed.
Chapter 12 SSL VPN
351