Component Bb - ZyXEL Communications Vantage CNM 2.3 User Manual

Centralized network management

Hide thumbs Also See for Vantage CNM 2.3:

Table of Contents

Edit screen, the following screen appears. Use this menu item to create a service

configuration building block.

Figure 218 Device Operation > Configuration Management > Building Block >

Configuration BB > Add/Edit (ZLD Service) > Create

The following table describes the fields in this screen.

Table 194 Device Operation > Configuration Management > Building Block >

Configuration BB > Add/Edit (ZLD Service) > Create

Starting Port

IP Protocol Number This field appears if the IP Protocol is User Defined.

17.9 Component BB

Use this menu item to manage component building blocks to the selected device.

A component BB is a part of setting such as a myZyXEL.com account, an IP

address, an IKE phase 1 or phase2 setting. To open this menu item, select the

Vantage CNM User's Guide

Select the protocol the service uses. Choices are: TCP, UDP, ICMP,

and User Defined.

This field appears if the IP Protocol is TCP or UDP. Specify the port

number(s) used by this service. If you fill in one of these fields, the

service uses that port. If you fill in both fields, the service uses the

range of ports.

This field appears if the IP Protocol is ICMP Type.

Select the ICMP message used by this service. This field displays the

message text, not the message number.

Enter the number of the next-level protocol (IP protocol). Allowed

values are 0 - 255.

Click this to save your changes and back to the previous screen.

Click this to exit this screen without saving your changes.

Chapter 17 Configuration Management