ZyXEL Communications Vantage CNM 2.3 User Manual page 240

Chapter 7 Device Advanced Settings
Table 94 Device Operation > Device Configuration > Advanced > Remote
Management (continued)
LABEL
Secure Client
IP Address
SNMP Configuration
Get
Community
Set
Community
Trap
Community
Trap
Destination
SNMP
Service Port
Service Access Select the interface(s) through which a computer may access the device
Secure Client
IP Address
DNS
Server Port
Service Access Select the interface(s) through which a computer may send DNS queries
Secure Client
IP Address
Apply
Reset
240
DESCRIPTION
A secure client is a "trusted" computer that is allowed to communicate
with the device using this service.
Select All to allow any computer to access the device using this service.
Choose Selected to just allow the computer with the IP address that you
specify to access the device using this service.
Enter the Get Community, which is the password for the incoming Get
and GetNext requests from the management station. The default is
public and allows all requests.
Enter the Set community, which is the password for incoming Set
requests from the management station. The default is public and allows
all requests.
Type the trap community, which is the password sent with each trap to
the SNMP manager. The default is public and allows all requests.
Type the IP address of the station to send your SNMP traps to.
You may change the server port number for a service if needed, however
you must use the same port number in order to use that service for
remote management.
using this service.
A secure client is a "trusted" computer that is allowed to communicate
with the device using this service.
Select All to allow any computer to access the device using this service.
Choose Selected to just allow the computer with the IP address that you
specify to access the device using this service.
The DNS service port number is 53 and cannot be changed here.
to the device.
A secure client is a "trusted" computer that is allowed to send DNS
queries to the device.
Select All to allow any computer to send DNS queries to the device.
Choose Selected to just allow the computer with the IP address that you
specify to send DNS queries to the device.
Click this to save your customized settings and exit this screen.
Click this to begin configuring this screen afresh.
Vantage CNM User's Guide