Chapter 30 Cnm System Setting; Servers Configuration - ZyXEL Communications Vantage CNM 2.3 User Manual

C
H A P T E R
Use these screens to configure Vantage CNM server settings such as servers
configuration, system maintenance, create and define device owner, software
upgrade, license management, and about.

30.1 Servers Configuration

You can configure these servers as you install Vantage CNM (in the installation
wizard) or after you install it in this screen.
Configure the Vantage CNM public IP server address, FTP server (for firmware
upload), and mail server (for Vantage CNM notifications and reports) in this
screen. These IP addresses will be the same as the Vantage CNM server computer
if they are all on the same computer.
The FTP server is used for file transfers, such as firmware upgrade.
The SMTP server is used for e-mail notifications.
You should know each server's IP address, username and password. File transfers
(FTP) and e-mail notifications (SMTP) will not work in Vantage CNM if these are
incorrectly configured.
To open this screen, click CNM System Setting in the menu bar and then click
Configuration > Servers > Configuration in the navigation panel.
Vantage CNM User's Guide
CNM System Setting
30
561