ZyXEL Communications Vantage CNM 2.3 User Manual page 389

Table 160 Device Operation > Device Configuration > Object > AAA Server > Active
Directory (or LDAP) > Group > Add (continued)
LABEL
Bind DN
Password
Base DN
CN Identifier
Search time
limit
Use SSL
Host Members
#
Members
Add icon
Total Records
Apply
Cancel
Vantage CNM User's Guide
DESCRIPTION
Specify the bind DN for logging into the AD or LDAP server. Enter up to
127 alphanumerical characters.
For example,
cn=zywallAdmin
name.
If required, enter the password (up to 15 alphanumerical characters)
for the ZyWALL to bind (or log in) to the AD or LDAP server.
Specify the directory (up to 127 alphanumerical characters). For
example,
o=ZyXEL, c=US
Specify the unique common name that uniquely identifies a record in
the AD or LDAP directory. Enter up to 127 alphanumerical characters.
Specify the timeout period (between 1 and 300 seconds) before the
ZyWALL disconnects from the AD or LDAP server. In this case, user
authentication fails.
Search timeout occurs when either the user information is not in the AD
or LDAP server(s) or the AD or LDAP server(s) is down.
Select Use SSL to establish a secure connection to the AD or LDAP
server(s).
The ordering of the LDAP servers is important as the ZyWALL uses the
AD or LDAP servers for user authentication in the order they appear in
this table.
This field displays the index number.
Specify the URI (Uniform Resource Identifier) of an AD or LDAP server.
You can enter the IP address (in dotted decimal notation) or the fully
qualified domain name (FQDN; up to 63 alphanumerical characters) of
the AD or LDAP server.
Click Add to add a new AD or LDAP server. You can add up to four AD or
LDAP member servers.
Click Remove to remove an AD or LDAP server.
This field displays the total number of host member entries.
Click Apply to save the changes.
Click Cancel to discard the changes.
specifies
zywallAdmin
.
Chapter 15 AAA
as the user
389