ZyXEL Communications Vantage CNM 2.3 User Manual page 216

Centralized network management

Hide thumbs Also See for Vantage CNM 2.3:

Table of Contents

Chapter 7 Device Advanced Settings

Operation in the menu bar, and then click Device Configuration > Advanced >

NAT > NAT Overview in the navigation panel.

Figure 86 Device Operation > Device Configuration > Advanced > NAT > NAT

The following table describes the fields in this screen.

Table 79 Device Operation > Device Configuration > Advanced > NAT > NAT

Global Setting

Sessions Per

Full Feature

This read-only field displays the highest number of NAT sessions that the

device will permit at one time.

Use this field to set the highest number of NAT sessions that the device

will permit a host to have at one time.

Use this section to select what kind of NAT the device should use for

WAN1 and WAN2 ports. In some cases, the device might be able to use

different kinds of NAT on different ports.

Select None to disable NAT on the device.

Select SUA Only to apply many-to-one mapping only (sufficient if the

device has only one public IP address).

Select Full Feature to avail of multiple mapping types.

Vantage CNM User's Guide

Troubleshooting