Wan1 And Wan2 (Zynos Zywall With Two Wan Ports) - ZyXEL Communications Vantage CNM 2.3 User Manual

Centralized network management

Hide thumbs Also See for Vantage CNM 2.3:

Table of Contents

Chapter 5 Device Network Settings

5.3.2 WAN1 and WAN2 (ZyNOS ZyWALL with two WAN ports)

Since ZyWALL 4.00, the WAN screens are organized differently than the previous

versions because it has two WAN ports. Use the WAN1 and WAN2 tabs to

configure the WAN1 and WAN2 ports. These tabs are similar and vary by

encapsulation type.

5.3.2.1 Ethernet Encapsulation

Use this screen to configure an Ethernet connection on one of the device's WAN

ports. To open this screen, click Device Operation > Device Configuration >

Network > WAN > WAN1/2.

Figure 36 Device Operation > Device Configuration > Network > WAN > WAN1/2

(ZyNOS ZyWALL with two WAN ports)

The following table describes the labels in this screen.

Table 21 Device Operation > Device Configuration > Network > WAN > WAN1/2

(ZyNOS ZyWALL with two WAN ports)

ISP Parameters for Internet Access

Encapsulation

You must choose the Ethernet option when the WAN port is used as a

regular Ethernet.

Vantage CNM User's Guide