Address Summary Screen - ZyXEL Communications Vantage CNM 2.3 User Manual

Centralized network management

Hide thumbs Also See for Vantage CNM 2.3:

Table of Contents

14.4 Address Summary Screen

The address screens are used to create, maintain, and remove addresses. There

are the types of address objects.

• HOST - a host address is defined by an IP Address.

• RANGE - a range address is defined by a Starting IP Address and an Ending

• SUBNET - a network address is defined by a Network IP address and

Netmask subnet mask.

The Address screen provides a summary of all addresses in the ZyWALL. To

access this screen, click Device Operation > Device Configuration > Object >

Address > Address. Click a column's heading cell to sort the table entries by

that column's criteria. Click the heading cell again to reverse the sort order.

Figure 164 Device Operation > Device Configuration > Object > Address > Address

The following table describes the labels in this screen. See

for more information as well.

Table 147 Object > Address > Address

Vantage CNM User's Guide

Select how many entries you want to display on each page.

This field is a sequential value, and it is not associated with a specific

This field displays the configured name of each address object.

This field displays the type of each address object. "INTERFACE" means

the object uses the settings of one of the ZyWALL's interfaces.

Chapter 14 Object

Section 14.4.1 on page