Edit A Trigger Port Rule - ZyXEL Communications Vantage CNM 2.3 User Manual

Table 83 Device Operation > Device Configuration > Advanced > NAT > Trigger Port
(continued)
LABEL
Start Port
End Port
Trigger
Start Port
End Port
Edit
Remove
Apply
Cancel

7.4.1 Edit a Trigger Port Rule

Use this screen to edit a trigger port forwarding rule on the device. To open this
screen, click Configuration > NAT, select SUA Only or Full Feature, click Edit,
select Trigger Port, and click the Index field for the rule.
Figure 91 Device Operation > Device Configuration > Advanced > NAT > Trigger
Port > Edit
Vantage CNM User's Guide
DESCRIPTION
This field displays a port number or the starting port number in a range of
port numbers.
This field displays a port number or the ending port number in a range of
port numbers.
The trigger port is a port (or a range of ports) that causes (or triggers) the
device to record the IP address of the LAN computer that sent the traffic to
a server on the WAN.
This field displays a port number or the starting port number in a range of
port numbers.
This field displays a port number or the ending port number in a range of
port numbers.
Click this to add or modify a trigger port rule.
Click this to delete a trigger port rule.
Click this to save your changes back to the device.
This field displays a port number or the ending port number in a range of
port numbers.
Chapter 7 Device Advanced Settings
223