ZyXEL Communications Vantage CNM 2.3 User Manual page 364

Chapter 14 Object
The following table describes the labels in this screen.
Table 144 Device Operation > Device Configuration > Object > User/Group >
Setting
LABEL
User Authentication Timeout Settings
User Authentication
Timeout Settings
User Type
Lease Time
(minutes)
Reauthentication
Time (minutes)
Edit
Miscellaneous Settings
Allow renewing
lease time ...
Enable user idle
detection
364
DESCRIPTION
This authentication timeout settings are used by default when you
create a new user account. They also control the settings for any
existing user accounts that are set to use the default settings. You
can still manually configure any user account's authentication
timeout settings.
These are the kinds of user account the ZyWALL supports.
Admin - this user can look at and change the configuration of the
ZyWALL
Limited-Admin - this user can look at the configuration of the
ZyWALL but not to change it
User - this user has access to the ZyWALL's services but cannot
look at the configuration
Guest - this user has access to the ZyWALL's services but cannot
look at the configuration
Ext-User - this user account is maintained in a remote server,
such as RADIUS or LDAP.
This is the default lease time for each type of user account. It
defines the number of minutes the user has to renew the current
session before the user is logged out.
Admin users renew the session every time the main screen
refreshes in the web configurator. Access users can renew the
session by clicking the Renew button on their screen. If you allow
access users to renew time automatically (see
page 362), the users can select this check box on their screen as
well. In this case, the session is automatically renewed before the
lease time expires.
This is the default reauthentication time for each type of user
account. It defines the number of minutes the user can be logged
into the ZyWALL in one session before having to log in again.
Unlike Lease Time, the user has no opportunity to renew the
session without logging out.
Click the icon to open a screen where you can edit the default
settings for that type of user account.
Select this check box if access users can renew lease time
automatically, as well as manually, simply by checking the
Updating lease time automatically check box on their screen.
This is applicable for access users.
Select this check box if you want the ZyWALL to monitor how long
each access user is logged in and idle (in other words, there is no
traffic for this access user). The ZyWALL automatically logs out the
access user once the User idle timeout has been reached.
Section 14.3 on
Vantage CNM User's Guide