ZyXEL Communications Vantage CNM 2.3 User Manual page 239

Table 94 Device Operation > Device Configuration > Advanced > Remote
Management (continued)
LABEL
Server Port
Server Access
Secure Client
IP Address
SSH
Server Host
Key
Server Port
Server Access
Secure Client
IP Address
TELNET
Server Port
Server Access
Secure Client
IP Address
FTP
Server Port
Server Access
Vantage CNM User's Guide
DESCRIPTION
You may change the server port number for a service if needed, however
you must use the same port number in order to use that service for
remote management.
Select the interface(s) through which a computer may access the device
using this service.
A secure client is a "trusted" computer that is allowed to communicate
with the device using this service.
Select All to allow any computer to access the device using this service.
Choose Selected to just allow the computer with the IP address that you
specify to access the device using this service.
Select the certificate whose corresponding private key is to be used to
identify the device for SSH connections. You must have certificates
already configured in the My Certificates screen.
You may change the server port number for a service if needed, however
you must use the same port number in order to use that service for
remote management.
Select the interface(s) through which a computer may access the device
using this service.
A secure client is a "trusted" computer that is allowed to communicate
with the device using this service.
Select All to allow any computer to access the device using this service.
Choose Selected to just allow the computer with the IP address that you
specify to access the device using this service.
You may change the server port number for a service if needed, however
you must use the same port number in order to use that service for
remote management.
Select the interface(s) through which a computer may access the device
using this service.
A secure client is a "trusted" computer that is allowed to communicate
with the device using this service.
Select All to allow any computer to access the device using this service.
Choose Selected to just allow the computer with the IP address that you
specify to access the device using this service.
You may change the server port number for a service if needed, however
you must use the same port number in order to use that service for
remote management.
Select the interface(s) through which a computer may access the device
using this service.
Chapter 7 Device Advanced Settings
239