Mode Overview, 1 Of 3; Introduction - Patton electronics SmartWare R.3.20 Software Configuration Manual

SmartWare Software Configuration Guide

Introduction

Figure 88 on page 560,
chy. Each box contains the mode name, the command to enter in this mode and the mode prompt printed in a
Telnet or console session. The commands are defined in appendix C,
Indicates that there could be more
than one instance of this component
<mode name>
<enter command>
<prompt>
Execution Modes
Operator Exec
-
<hostname>
Administrator Exec
<hostname>#
Introduction
figure 89 on page 561, and
Configuration Modes
Configure
<hostname>(cfg)#
Figure 88. Mode overview, 1 of 3
figure 90 on page 562 show the configuration mode hierar-
"Command summary"
Contexts and interfaces
Context CS
[switch]
<host>(ctx-cs)[<name>]#
Context IP
context ip [router]
<host>(ctx-ip)[<name>]#
B • Mode summary
on page 563.
Complex Function
complex-function <name>
<host>(func)[<name>]#
Interface FXS
interface fxs <name>
<host>(if-fxs)[<name>]#
Interface H323
interface h323 <name>
<host>(if-h323)[<name>]#
Interface ISDN
interface isdn <name>
<host>(if-isdn)[<name>]#
Interface SIP
interface sip <name>
<host>(if-sip)[<name>]#
Mapping Table
mapping-table <name>
<host>(map-tab)[<name>]#
Precall Service Table
precall-service-table <name>
<host>(pcs-tab)[<name>]#
Routing Table
routing-table <name>
<host>(rt-tab)[<name>]#
Service CFNR
service cfnr <name>
<host>(svc-cfnr)[<name>]#
Service Distribute
service distribution-group <name>
<host>(svc-dist)[<name>]#
Service Hunt-Group
service hunt-group <name>
<host>(svc-hunt)[<name>]#
DYNDNS
<host>(dyndns)#
IP Interface
interface <name>
<host>(if-ip)[<name>]#
560