Home Office With Fax - Patton electronics SmartWare R.3.20 Software Configuration Manual

SmartWare Software Configuration Guide
Max. Delay:
Max. Packet Loss:
Shrink Speed:
Grow Step:
Grow Attenuation:
High Pass Filter:
Post Filter:
Fax
---
Detection:
T.38 High Speed Redundant Packets:
T.38 Low Speed Redundant Packets:
Max. Bit Rate:
Volume:
Error Correction:
HDLC:
Dejitter Max Delay:
Modem
-----
Max. Bit Rate:
Volume:
HDLC:
DTMF
----
Relay:
Mute Encoder:
RTP
---
Payload Type NTE:
Description:
3. Create VoIP profile and give it a name. All settings have default values
4., 5. Remove the default codecs G.711alaw and G.711uLaw
6. Add codec g723-6k3 with silence-suppression enabled
7. Allow the dejitter buffer to compensate 100 milliseconds of network jitter.
8. Show the configured profile.
Home office with fax
Preconditions are those used in section
and high jitter. In this example, bandwidth is 256 kbps, what enables us to use the G.729 codec. But since the
fax protocol must also be supported, the configuration is extended:
1 node>enable
Examples
100ms
4/1000
1
1
1
enabled
enabled
CED Tone
0
0
14400bps
-9.500dB
enabled
enabled
200ms
14400
-9.500dB
enabled
enabled
enabled
101
"Home office in an enterprise network"
40 • VoIP profile configuration
on page 522: low bandwidth
524