Patton electronics SmartWare R.3.20 Software Configuration Manual page 166

SmartWare Software Configuration Guide
Mode: Port serial
Step
node (prt-ser)[ slot/port ]# baudrate
1
baudrate
Example: Configuring baudrate to 64,000 bps
The following example configures a baudrate of 64,000 bps on the serial interface. Verify that the command
show port serial detail 5
baudrate of the selected hardware.
node(cfg)#port serial 0 0
node(prt-ser)[0/0]#transmit-data-on-edge negative
node(prt-ser)[0/0]#show port serial detail 5
HDLC Driver: 0x8496b8
=====================
Slot:
Number of Ports:
Port: serial 0 0 0
------------------
State:
Configuration
Hardware Port:
Port Type:
CRC:
Transmit Edge:
Max Frame Length:
Baudrate:
Recv Threshold:
Statistics
Received frames:
Rx good frames:
Rx CD lost:
Rx Overrun:
Rx CRC errors:
Serial port configuration task list
Command
output displays the correct baudrate. True baudrate in the Status section shows the
0
1
OPENED
X.21
DCE
CRC-16
Normal
1920
64000 bps
1
116101
116099
0
0
0
14 • Serial port configuration
Purpose
Configures the baudrate for the serial interface.
166