Patton electronics SmartWare R.3.20 Software Configuration Manual page 427

Software for smartnode series
Table of Contents

Advertisement

SmartWare Software Configuration Guide
Class
Normal Event
response-to-status-
(Cont.)
enquiry
normal-unspecified
no-circuit-channel-avail-
Resource
able
Unavailable
network-out-of-order
temporary-failure
switching-equipment-
congestion
access-info-discarded
circuit-channel-not-
available
resources-unavailable
qos-unavailable
Service or
Option Not
Available
facility-not-subscribed
bearer-capability-not-
authorized
Call router configuration task list
Table 16. Hunt group drop causes (Continued)
Default Behavior
Cause
of the Hunt
Group Service
Drop original call
Drop original call
Hunt for next desti-
nation
Hunt for next desti-
nation
Hunt for next desti-
nation
hunt for next desti-
nation
Hunt for next desti-
nation
Hunt for next desti-
nation
Hunt for next desti-
nation
Drop original call
Drop original call
Drop original call
33 • Call router configuration
Description
The status message is generated in direct
response to receiving a status inquiry mes-
sage.
Reports the occurrence of a normal event
when no standard cause applies.
The connection fails because no appropri-
ate channel is available to take the call.
The destination cannot be reached
because of a network malfunction, and the
condition can last for an extended period.
An immediate reconnect attempt will
probably fail.
An error occurs because of a network
malfunction. The problem will be resolved
shortly.
The destination cannot be reached
because the network switching equipment
is temporary overloaded.
The network cannot provide the requested
access information. This cause indicates
that the network could not deliver access
information to the remote user as
requested.
The equipment cannot provide the
requested channel for an unknown rea-
son.
The requested channel or service is
unavailable for an unknown reason.
The network cannot provide the requested
quality of service.
The remote equipment supports the
requested supplementary service by sub-
scription only. This cause indicates that the
network could not provide the requested
supplementary service because the user
has not completed the necessary adminis-
trative arrangements with its supporting
networks.
The user requests a bearer capability the
network provides, but the user is not
authorized to use it. This can be a sub-
scription problem.
427

Advertisement

Table of Contents
loading

This manual is also suitable for:

Smartware release 3.20

Table of Contents